Note de ce sujet :
  • Moyenne : 0 (0 vote(s))
  • 1
  • 2
  • 3
  • 4
  • 5
New posts to come soon.
Has been a while since I last posted but I haven't given up on NuVinci hubs. My modified one has done another 1000 miles without any issues. Nothing interesting to report on recently but hoping to change that soon.

I want to get an N380 and have a look inside to see what Fallbrook has done about the metal hardness issue. My modification works but isn't perfect. Regular bushing replacements, reduced overdrive ratio when they're worn and possibly reduced efficiency.

Get hold of a power meter such as Garmin Vector pedals most likely by renting. See if I can get some data that will show the hubs efficiency. Ride the same roads and keep swapping between derailleur and NuVinci. I think there will be some interesting things to learn about how the NuVinci's squishiness affects pedal stroke.
- Oran
Can't wait to read about it! In the meantime, I have just started working in an engineering facility with some really "brainy" persons... I might have a peek inside a hub with them shortly!
Si ça a déjà été fait, je peux le faire
Si ça n'a jamais été fait, donnez-moi juste le temps de trouver comment !


Atteindre :

Utilisateur(s) parcourant ce sujet : 1 visiteur(s)